BAM! Mats Are Better Than Using Plywood
BAM! Mats vs. Plywood is an important decision to make for ground protection. Sheets of plywood are frequently used by contractors to safeguard an existing driveway, patio, sidewalk, and lawn they are working around. They are also used by groundskeepers at stadiums, ballparks, golf courses and college campuses.
However, plywood can be a major annoyance. Many contractors are learning these days that there is a stronger and more reliable substitute… BAM! Mats.
After switching from plywood to BAM! (Bad Ass Mats) Mats, contractors have seen an instant improvement in crew performance. It is significantly simpler to move and load the mats into a truck.
BAM! Mats Rental Options Available
They have also proven to be remarkably durable. There hasn’t been any fading, cracking, or bending after a full season of use. By this point, a plywood sheet would be severely worn. Additionally, BAM! Mats vs. Plywood are much easier to handle.
Contractor personnel value BAM! Mat’s decreased weight compared to plywood. A 3/4″ plywood sheet typically weighs about 60 pounds, whereas a 4×8 mat averages 56 pounds. However, a significant change in plywood occurs gradually. Plywood begins to gain weight by absorbing dirt, mud and moisture. A BAM! Mat can’t, and doesn’t.
BAM! Mats vs. Plywood are more manageable and convenient to work with. They are easier to carry because they have built-in hand-holes. A worker might use a saw in an attempt to make holes in plywood sheets. However, you can’t be assured how smooth those hand-holes would be not to mention, the amount of time consumed to make them.
8-large hand holes fit a gloved hand easily to maintain a safe working environment.
BAM! Mats are suitable for any size job. Whether it’s in your backyard garden or large acreage farm, front yard or stadium field, these mats protect your property from damaging large equipment used to get the job done.
Make The Switch To BAM! Mats vs. Plywood
Splinters are already common with plywood. You always get splinters on your job sites because plywood sheets often break on the edges when you handle them repeatedly. You will eventually end up with splinters in the palm of your hand or elsewhere. The damage that can be done could put personnel out of work or at the very least, hamper their work procedures.
A BAM! Mat’s built-in hand-holes offer still another benefit. In order to keep the mats together in a stack, passing a rope through the hand-holes allows you to handle and transport them much easier. Sheets of plywood have a tendency to move and slide around. BAM! Mats are much more easy to handle because of their durability and functionality.
HDPE plastic used to make BAM! Mats is robust and long-lasting, They won’t absorb moisture, won’t fade or cut, and can tolerate extremely high or low temperatures.
Another BAM! Mats vs. Plywood consideration is the fact that you have to replace a piece of plywood every few years is a primary disadvantage of utilizing it for ground protection. Operating heavy machinery on ground mats is the main goal of its use. That simply doesn’t work because plywood breaks.
Made from 3/8″ thick thermoformed HDPE plastic, BAM! is built to withstand whatever your jobsite has to throw at it. The sheets only weigh 56 pounds but resist fading, splintering and cracking with an 80 ton weight rating.
Protect Your Machinery With BAM! Mats vs. Plywood
Another significant BAM! Mats vs. Plywood concern is the possibility of a plywood sheet damaging a piece of machinery. Plywood is quite stiff. Some corners begin to rise off the ground as it rests on an uneven surface. There are times when the plywood can get wedged in the machinery’s track. Downtime results from stopping to remove the plywood. More significantly, it could have damaged a costly piece of equipment.
The fact that plywood is flat and might get slippery is another disadvantage. Additionally, a yard or grassy common area may be more harmed by the perfectly level surface, especially if the grass is damp. After finishing a job using plywood, you can have additional labor since you need to return with rakes and a leaf blower to re-fluff the grass. You don’t have to be concerned about that with BAM! Mats vs. Plywood.
Exclusive Interlocking Tread Design
Keeps BAM! Mats From Shifting While Stacked
Another BAM! Mats vs. Plywood comparison is the twin-sheet design, a novel method in which two plastic sheets are fused together during the thermoforming process, is advantageous for BAM! Mats. Each side of the mat have unique qualities because of this design. A BAM! Mat features a tread pattern on one side that is specifically made for equipment and another side that is made for pedestrian activity.
BAM! Mats are less costly in the long term because you don't have to keep replacing those worn-out plywood sheets, so your rate of return is much better with BAM! Mats vs. Plywood. More significantly, a crew will avoid losing a significant amount of time and frustration from using plywood.
Durable, efficient and less costly, BAM! Mats vs. Plywood can handle any of your ground protection needs when working, transporting and handling materials on grass and other delicate surfaces. Whether it is your yard or large sports stadiums, ballparks, recreation fields, golf courses or college campuses, Bam! Mats are suitable for any size job.
- Exclusive Dual Side Traction Design
- Equipment Tread Pattern
- Pedestrian Tread Pattern
ON SALE NOW!
BAM! Mats vs. Plywood – More Convenient and Easy To Use
According to studies, standing on hard surfaces for lengthy periods of time has a bad impact on a worker’s health and productivity. The purpose of these mats is to reduce fatigue and physical harm to feet, knees and lower back.
BAM! mats are easy to keep clean. Unlike with plywood which absorbs moisture, users simply spray the mats off with a hose because BAM! mats will not absorb water.
A three year limited warranty ensures these mats to be free from manufacturing and material defects. Value priced versus national brands and a more cost effective alternative to plywood sheets, because these mats are re-usable & won’t absorb moisture.
Do You Want to Make Your Material Handling Facility Safer?
Custom Equipment Company can assist you by providing
dependable equipment to make your facility much safer.
The intricacies of equipment installation and safe layout design
are other areas in which we can help.
Call Us At (800)922-6120
To Speak To a Knowledgeable Representative
Custom Equipment Company HELPS
Putting safety measures like these in place provides the assurance necessary to propel an all-around more productive and efficient organization for your personnel and effectiveness.
Without question, safe and secure property storage is essential. Adequate security equipment and a culture of awareness are necessary to prevent loss, damage, or theft of vital supplies and resources. A secure space can be created with racks and shelving, which are utilized in many different applications to safeguard contents.
In addition to being affordable and safe pallet rack systems offer more versatility. Their modular architecture makes it simple to remove, relocate, and reassemble them. The greatest advantage of pallet racks is their exceptional capacity to provide safety and security around-the-clock.
Call (800)922-6120 For More Information
or Click On This Link…
Custom Equipment Company, empathizes with any Material Handling Shipping and Storage issues you may be experiencing. When using us as a supplier, please work closely with your CEC Customer Representative, to make certain your order is fulfilled in an expedient and efficient manner.
Visit dev.cecmhs.com/ To Select From A Large Variety of |
