Clamp+Go Dolly Handle

Clamp+Go Dolly Handle US Patent #US8424886 quickly clamps onto round metal drum dollies with various sized sidewalls. Well suited to high volume drum handling applications. Push, pull and rotate drums by applying force below drum’s center of gravity, and reduce the risks to workers.

Think SAFETY and Ergonomics. The Patented Clamp+GO Dolly Handle reduce effort for workers. Attach the Dolly Handle to the sidewall of your drum dolly with a downward push to engage the quick-coupling mechanism. Now you’ve got a drum dolly with a handle to pull or push to move your drum around. Easily move into and out of confined areas. And no risk of catching your fingers between the drum and other objects.

Use your steel-toed boot to disengage the handle from your dolly. . . then quickly connect to another. Always comply with the maximum capacity of the drum dolly being handled.

A drum dolly with a handle attached is far more stable because you apply even force below the drum’s center of gravity. Whereas lateral force at the top of a drum shifts over 70% of the weight to the front dolly wheels. This can make the dolly difficult to control, and potentially hazardous without warning – even topple over, especially if the dolly wheels hit an obstruction, a hole in the floor, or while descending a slope.

Decrease the risk of this happening by attaching the handle to the drum dolly. You then pull from the bottom of the drum to move it around, with weight far more evenly distributed on all dolly wheels. You have greater control, and significantly reduce the risk of tipping.

This Dolly Handle can be used with round metal drum dollies of various sizes. Move the quick-pin to adjust for a 2″, 2.5″ or 3″ (5.08, 6.35 or 7.62 cm) tall dolly sidewall. It will also work with many other brands of round metal drum dolly. It MUST be able to grip the top and bottom of the dolly sidewall, so it will NOT work if the dolly has a solid bottom.

Steel surcharge may apply.