Lateral File Cabinets

Price range: $699.86 through $1,867.97

Features

  • Heavy gauge welded steel construction

Note: Steel surcharges may apply.

About This Item

Lateral File Cabinets

 

Lateral File Cabinets heavy gauge welded steel construction ensures rigidity and durability for many years of use.  Files will accommodate letter or legal hanging files. A mechanical interlock system prevents more than one drawer from opening at a time to eliminate the danger of tipping.

Lateral File CabinetsLateral File Cabinets

Drawers and shelves glide on heavy duty, full extension ball bearing suspensions. A single lock controls all openings. Locks are core removable with master key (order keys separately). Each opening comes with side-to-side hang rods for the folders. Optional front-to-back rods (H15CR) are available.

Drawers and doors have easy grip, full-width pulls with recessed label holders. Four leveling glides allow the unit to be level on uneven floors. To reduce risk of tipping, order two drawer lateral files with counterweights (suffix “W”) for all applications except under a work surface in a workstation. Five and six-high units have retractable door(s) with roll-out drawer on top opening(s). Durable powder-coat paint finish.

Available in Light Gray, Medium Gray, Putty, Sand and Black

ColorsChoose an optional laminate top in Oak or Walnut to create a work surface on two and three-high files.

 Industrial Furniture Video

Features

  • Material: Laterals are of high quality, cold rolled carbon steel, free of scale or rust, and fully pickled. Exposure of edges, corners, and surface areas are free of sharp edges and all workmanship is of the highest quality in the industry.

    Lateral File Cabinets

  • Finish: All steel components are thoroughly clean and phosphatized for rust resistance in a five-stage pre-treatment process. A high grade of polyester/epoxy powder paint application is electrostatic with a gloss reading of between 55 and 65. The finish shall have a salt spray rating of 250 hours or more.
  • Construction: The cabinet construction is exceptionally clean and smooth with rigid interior framing. All inside corner openings of all files are secure by brazing together.
  • Side Panel: The side panel is a single sheet, with flange at the rear, with a 5/8” face channel front.
  • Back Panel: The back panel is a single sheet, offset on both sides for a smooth surface with the side panel rear flange.
  • Uprights: The front uprights have six bends and are rigidly secure at the extreme lower front area of the file by 11 gauge (.119) braces. The braces are arc welding to the front uprights, to the base, and to the 11 gauge corner gussets. Both front and rear uprights slot or pierce on 3” modular centers to accept door tracks, drawer slides and all other interior members. The 3” modular centers permit many arrangements of shelf or drawer combinations in any cabinet height.
  • Bottom Panel: The bottom panel consists of a separate base shelf, with channel on all four sides and bottom front horizontal reinforcement base rail. The base rail joins to the base shelf by spot welding. Additionally, four corner gussets have spot-welds to the inside of the bottom panel.

    Modular Drawer Storage Video

Shelving and Doors

  • Roll-out Shelf: The roll-out shelf consists of a one piece bottom and back, with channel in the middle to accept a lateral operation follow block and two ends that flange at the bottom and rear. The ends are slots to accept hanging folder rods for either letter or legal material. The shelf bottom slots on 2” centers to accept dividers to serve as supports for filing material.

Lateral File Cabinets

  • Doors: All door fronts are box form and are durable on both sides by door slide brackets. Drawer fronts are channels, top and bottom and with ends flanged and offset for spot welding to ends of roll-out shelf. Drawer inner panels come with all drawers. All short pull doors and drawer fronts have a durable black plastic recessed handle with a plastic chrome frame.
  • Short Pulls: All short pulls for doors and drawers are at the bottom of the door of drawer. All long pull doors and drawer fronts have painted steel recessed pulls.
  • Long Pulls: All long pull doors and drawer fronts have painted steel recessed pulls. All long pulls for drawers are at the top of the drawer. All long pulls for retracting doors are at the bottom of the door.

Modular In-Plant Offices Video

Lateral File Cabinet Accessories
SKUDescriptionWeightPrice
H15CRPair of Front To Back Rods1 Lb.$8.20
HT1836Laminate Top For 26″W File23 Lbs.$207.63
HT1842Laminate Top For 42″W File26 Lbs.$265.69

 

 

 

 

 

 

 

CEC Product Collection Video

 

Call (800)922-6120 for exact shipping charge.

Automated Warehouse Video

Custom Equipment Company – Material Handling Specialists

See More Products Here

GENERAL SAFETY INFORMATION

Custom Equipment Company
Custom Equipment Company HELPS!

Some item parts may have sharp edges, so take CARE when handling various pieces to avoid injury.  For safety, wear a pair of work gloves when assembling and performing any maintenance on units, because safety always comes first!

Don’t see the Specs you need?

Then call us at (800)922-6120

or by Email Sales@cecmhs.com

Monoflo Video's

Want to know more? Then Subscribe for Monthly Updates to our Newsletter

Find more amazing products on our Case Studies!

 

Click Here For Custom Equipment Company Products

For Exact Shipping Charges.

Additional information

Lateral File Cabinets Formats and Sizes

2 Drawers 36"W x 17.562"D x 27.562"H, 2 Drawers 36"W x 17.562"D x 27.562"H with counterweights, 3 Drawers 36"W x 17.562"D x 39.375"H, 4 Drawers 36"W x 17.562"D x 51.25"H, 5 Drawers 36"W x 17.562"D x 65"H, 6 Drawers 36"W x 17.562"D x 76.875"H, 2 Drawers 42"W x 17.562"D x 27.562"H, 2 Drawers 42"W x 17.562"D x 27.562"H with counterweights, 3 Drawers 42"W x 17.562"D x 39.375"H, 4 Drawers 42"W x 17.562"D x 51.25"H, 5 Drawers 42"W x 17.562"D x 65"H, 6 Drawers 42"W x 17.562"D x 76.875"H

You may also like

Related Products