Permanent Lift Magnets EPL Series can lift and transfer steel and iron without slings, hooks, or cables. Make quick work of difficult time consuming steel handling.
Highest rated capacity permanent lift magnet on the market. Handle flat materials with ease.
Four models with capacities up to 7,500 lbs. on flat material.
Easy to rotate handle with no backlash. Manual ON and OFF. No power supply required.
Lift Magnet Guidelines
Surface Condition: Magnet face and load surface must be clean and smooth. Capacity ratings are on flat, clean and polished steel plate with magnet face in full contact with the load surface. Paint, coatings, scale or other materials between the load surface and the magnet will adversely affect the holding power of the magnet.
Material Thickness: Lifting capacity is lower on thinner materials. Contact dealer for more capacity information.
Material Composition: Magnet capacity is for lifting low carbon steel. Other materials may reduce lifting capacity.
Load Size and Position: Consider thin sheets, rough and irregular surfaces, odd shapes and scale all affect holding power adversely when establishing a safety factor. Position the magnet on the load center of gravity. Loads that tilt or are not in balance and significantly affect the holding power of the magnet.
Capacity: Maximum attractive force is approximately twice the lifting capacity. Capacity ratings are on flat, clean and shiny steel plate with magnet face in full contact with the load surface. The above factors should be taken into account when determining appropriate safety factors for a given load. A minimum of 3 to 1 safety factor must apply, given the actual breakaway force for a given load.
Refer to ASME Standard B30.20 for inspection and operating procedures of Close Proximity Operational Lifting Magnets and read Manufacturer’s Operating Manual before using magnet.
GENERAL SAFETY INFORMATION
Some Permanent Lift Magnets EPL Series parts may have sharp edges, therefore CARE must be taken when handling various pieces to avoid injury. For safety, wear a pair of work gloves when assembling and performing any maintenance on units.
Don’t see the Specs you need?
Call us at 855-905-0875
or by Email Sales@cecmhs.com
Don’t miss out on special Case Studies and Company Blogs to stay in the know with Custom Equipment Company!
Contact a Sales Representative today and find out how we can meet your needs! Email us at Sales@cecmhs.com