Permanent Lift Magnets RPL Series lift, move, or position round or flat materials with the same magnet.
Super compact rare earth SafeHold® RPL Series manually operated permanent lift magnets offer the flexibility to handle multiple operations.
Five models with capacities up to 5,000 lbs. on flat and 1,250 lbs. on round materials.
Locking mechanism built into handle for one hand operation.
Manual ON and OFF. No power supply required.
Lift Magnet Guidelines
Surface Condition: Magnet face and load surface must be clean and smooth. Capacity ratings are on flat, clean and polished steel plate with magnet face in full contact with the load surface. Paint, coatings, scale or other materials between the load surface and the magnet will adversely affect the holding power of the magnet.
Material Thickness: Lifting capacity is lower on thinner materials. Contact dealer for more capacity information.
Material Composition: Magnet capacity is for lifting low carbon steel. Other materials may reduce lifting capacity.
Load Size and Position: Consider thin sheets, rough and irregular surfaces, odd shapes and scale all affect holding power adversely when establishing a safety factor. Position the magnet on the load center of gravity. Loads that tilt or are not in balance and significantly affect the holding power of the magnet.
Capacity: Maximum attractive force is approximately twice the lifting capacity. Capacity ratings are on flat, clean and shiny steel plate with magnet face in full contact with the load surface. The above factors should be taken into account when determining appropriate safety factors for a given load. A minimum of 3 to 1 safety factor must apply, given the actual breakaway force for a given load.
Refer to ASME Standard B30.20 for inspection and operating procedures of Close Proximity Operational Lifting Magnets and read Manufacturer’s Operating Manual before using magnet.
GENERAL SAFETY INFORMATION
Some Permanent Lift Magnets RPL Series parts may have sharp edges, therefore CARE must be taken when handling various pieces to avoid injury. For safety, wear a pair of work gloves when assembling and performing any maintenance on units.
Don’t see the Specs you need?
Call us at 855-905-0875
or by Email Sales@cecmhs.com
Contact a Sales Representative today and find out how we can meet your needs! Email us at Sales@cecmhs.com