Rigid-Lock QuickBerm® is a fluid-tight, single piece construction offers quick and easy setup – no assembly required.

Ergonomic design provides 100% inside berm accessibility with an unobstructed side-to-side floor space for vehicle tires, foot traffic, and cleaning. UV-resistant, durable, modified PVC-coated fabric withstands petroleum, oils, grease, and most acids.

Heavy duty grommets permit anchoring under high winds. Helps comply with EPA and SPCC standards. 5 year warranty. FOB Shipping Point.

Patented Rigid-Lock design with built-in stainless steel wall supports lock the sidewalls in a 12″ high, 90″ vertical position. A simple tug lays the support flat for vehicle drive-in from any angle.

Reinforced CriticalCorner™ features wraparound diagonal radio frequency welds for exceptionally strong structural integrity – prevents unwrapping or sagging.

For exterior dimension, add 8″ to width and length to account for support and hub.
When selecting a berm size, allow 12″ at entry or exit for lowering and raising the wall.

The built-in Rigid-Lock wall supports maximize usable space inside the berm and greatly reduce any tripping hazard on the berm perimeter.

The device only folds down one way, inward towards the inside of the berm. The one-piece design folds down flat and remains integral to the sidewall. Supports resist extreme temperatures (-50F to 160F).

When in the down position, they can withstand vehicle weights in excess of 11,000 lbs (5,000 kg) at each tire. Additionally, Rigid-Lock supports will perform at full rim containment height—meaning the berm is entirely full—without bend or buckles.

In case of damage, for example a user drives out of the berm without lowering the wall to the proper exit position, the stainless steel supports are replaceable.

Custom Equipment Company – Material Handling Specialists